Skip to main content
ComfortSeal Mask with Elbow and strap, available in 3 sizes
ComfortSeal Mask with Elbow, Shown with AeroEclipse BAN Nebulizer
ComfortSeal Mask with Elbow, Shown with AeroEclipse BAN Nebulizer
ComfortSeal Mask with Elbow, Shown with AeroEclipse BAN Nebulizer
ComfortSeal Mask with Elbow and strap, available in 3 sizes
ComfortSeal Mask with Elbow, Shown with AeroEclipse BAN Nebulizer
ComfortSeal Mask with Elbow, Shown with AeroEclipse BAN Nebulizer
ComfortSeal Mask with Elbow, Shown with AeroEclipse BAN Nebulizer

COMFORTSEAL* Mask

For use with AEROECLIPSE* BAN* Nebulizers
Nebulized Medication

COMFORTSEAL* Masks contour gently to your face, providing a secure and comfortable fit. Anatomically designed for minimal dead space, the soft silicone elastomer safeguards against facial irritation. Medium and large masks come with an adjustable strap that helps you comfortably position the mask over your face.  The mask is single-patient use, reusable for 6 months. Please refer to the instructions for use for guidance on cleaning and disinfecting the mask.

COMFORTSEAL* Masks are available in three sizes: small (0-18 months), medium (1-5 years) and large (5+ years).

AEROECLIPSE* BAN* Nebulizers are sold separately

Please select an option for additional detail.

Currently this is not available for purchase through this website.

How to Use:

Image
ComfortSeal Mask with Straps - Instructions for use

Step 1

Verify that the elbow adapter (B) is firmly secured to the mask. Ensure the exhalation valve (A) located at the top of the mask is intact.

Warning: Risk of suffocation! If the patient vomits during treatment and the mask is not removed there is a risk of suffocations. As such, infants, children, and persons with limited capabilities must be supervised.

Caution: Do not cover or seal the exhalation port.

Image
ComfortSeal Mask IFU Image 2

Step 2

Hold the mask in an upright position. Rotate the elbow connector so it is horizontal.

Image
ComfortSeal Mask on face with straps set appropriately

Step 3

For medium and large masks, position the mask over your face. Gently place the strap (C) around the back of your head.

Image
ComfortSeal Mask on face side view

Step 4

For medium and large masks, pull each strap end to ensure a snug fit and achieve a seal around mouth and nose.

Image
Demonstration of hooking ComfortSeal Mask to Nebulizer

Step 5

Remove the mouthpiece from the nebulizer. Attach the Elbow Adapter (B) to the mouthpiece opening. 

Caution: The nebulizer must always be upright when used with the mask, even when lying back for a treatment. 

Image
Refer to instructions provided with Nebulizer

Step 6

Follow the instructions supplied with the nebulizer. 

Warning: Have enough mask pressure against the face to prevent air leaks at the nose near the eyes. Refer to the drug product monograph for more information. 

Caution: Use the nebulizer in continuous mode with the mask if you can't actuate it or can't form a tight face seal. Large air masks may cause the nebulizer to not work in breath actuated mode. 

Product Resources


COMFORTSEAL* Mask Sizer

Soft silicone masks contour gently to the face providing a secure and comfortable fit. Available in small, medium and large sizes.

Download


 

How to Clean

The mask can be cleaned after each use.

1. Remove the elbow adapter from the mask. Soak both parts for 15 minutes in a mild solution of liquid dish detergent and lukewarm clean water. Agitate gently.

2. Rinse parts in clean water.

3. Shake out excess water and allow to air dry. Ensure parts are dry before reassembly.

4. To reassemble, insert the elbow adapter into the opening on the mask. Hold the mask in an upright position. Rotate the elbow connector so it is horizontal.

Disinfection 

1. The mask can be disinfected each day.

2. First, clean the mask. Do not dry or reassemble the device.

2A - Isopropyl Alcohol: Soak the parts in 70% isopropyl alcohol for 1 minute.

2A - Bleach: Soak the parts in a 1:50 bleach to water solution (1 tablespoon (15 mL) bleach in 3¼ cups (800 mL) water) for 3 minutes. You may substitute a respiratory equipment disinfectant (such as Milton, Dodie, or Control III) for the bleach solution. Follow the disinfectant instructions for use.

3. Rinse parts thoroughly in clean water.

4. Shake out excess water and allow to air dry. Ensure parts are dry before reassembly.

5. To reassemble, insert the elbow adapter into the opening on the mask. Hold the mask in an upright position. Rotate the elbow connector so it is horizontal.

Download our full instructions.

Product Resources


COMFORTSEAL* Mask Sizer

Soft silicone masks contour gently to the face providing a secure and comfortable fit. Available in small, medium and large sizes.

Download


 

FAQs

The small size mask is recommended for up to 18 months of age. The medium size mask is recommended for 1 to 5 years of age. The large size mask is recommended for over 5 years of age.


COMFORTSEAL* Mask Sizer

Soft silicone masks contour gently to the face providing a secure and comfortable fit. Available in small, medium and large sizes.

Download

Masks are essential for infants and younger children. Masks are also ideal for increased ease of use.

The mask is silicone. It’s not made or manufactured with bisphenol A (BPA), phthalates, latex or lead.

The COMFORTSEAL* Mask should be replaced after 6 months of use.

The mask can be cleaned after each use.

  1. Remove the Elbow Adapter from the mask. Soak both parts for 15 minutes in a mild solution of liquid dish detergent and lukewarm clean water. Agitate gently.
  2. Rinse parts in clean water.
  3. Shake out excess water and allow to air dry. Ensure parts are dry before reassembly.
  4. To reassemble, insert the Elbow Adapter into the opening on the mask. Hold the mask in an upright position. Rotate the Elbow Connector so it is horizontal.

Download our full instructions.

The mask can be disinfected each day.

  1. First, clean the mask. Do not dry or reassemble the device.
  2.  
    1. 2A - Isopropyl Alcohol: Soak the parts in 70% isopropyl alcohol for 1 minute.
    2. 2B - Bleach: Soak the parts in a 1:50 bleach to water solution (1 tablespoon (15 mL) bleach in 3¼ cups (800 mL) water) for 3 minutes. You may substitute a respiratory equipment disinfectant (such as Milton†, Dodie†, or Control III†) for the bleach solution. Follow the disinfectant instructions for use.
       
  3. Rinse parts thoroughly in clean water.
  4. Shake out excess water and allow to air dry. Ensure parts are dry before reassembly.
     
  5. To reassemble, insert the Elbow Adapter into the opening on the mask. Hold the mask in an upright position. Rotate the elbow connector so it is horizontal.

† trade-marks of the respective companies

Download our full instructions.

Recommended Solutions