COMFORTSEAL* Mask
For use with AEROECLIPSE* BAN* Nebulizers
Nebulized Medication
COMFORTSEAL* Masks contour gently to your face, providing a secure and comfortable fit. Anatomically designed for minimal dead space, the soft silicone elastomer safeguards against facial irritation. The mask is single-patient use, reusable for 6 months. Please refer to the instructions for use for guidance on cleaning and disinfecting the mask.
COMFORTSEAL* Masks are available in three sizes.
Image
Step 1
Verify that the elbow adapter (B) is firmly secured to the mask. Ensure the exhalation valve (A) located at the top of the mask is intact.
Image
Step 2
Hold the mask in an upright position. Rotate the elbow connector so it is horizontal.
Image
Step 3
Remove the mouthpiece from your AEROECLIPSE* BAN* Nebulizer. Attach the Elbow Adapter (B) to the mouthpiece opening. Caution: The AEROECLIPSE* BAN* Nebulizer must always be upright when used with the mask, even when lying back for a treatment.
Product Resources
COMFORTSEAL* Mask Sizer
Soft silicone masks contour gently to the face providing a secure and comfortable fit. Available in small, medium and large sizes.
How to Clean
The mask can be cleaned after each use.
1. Remove the elbow adapter from the mask. Soak both parts for 15 minutes in a mild solution of liquid dish detergent and lukewarm clean water. Agitate gently.
2. Rinse parts in clean water.
3. Shake out excess water and allow to air dry. Ensure parts are dry before reassembly.
4. To reassemble, insert the elbow adapter into the opening on the mask. Hold the mask in an upright position. Rotate the elbow connector so it is horizontal.
Disinfection
1. The mask can be disinfected each day.
2. First, clean the mask. Do not dry or reassemble the device.
2A - Bleach: Soak the parts in a 1:50 bleach to water solution (1 tablespoon (15 mL) bleach in 3¼ cups (800 mL) water) for 3 minutes. You may substitute a respiratory equipment disinfectant (such as Milton†, Dodie†, Control III† or Cidex†) for the bleach solution. Follow the disinfectant instructions for use.
2B - Isopropyl Alcohol: Soak the parts in 70% isopropyl alcohol for 1 minute.
3. Rinse parts thoroughly in clean water.
4. Shake out excess water and allow to air dry. Ensure parts are dry before reassembly.
5. To reassemble, insert the elbow adapter into the opening on the mask. Hold the mask in an upright position. Rotate the elbow connector so it is horizontal.
Product Resources
COMFORTSEAL* Mask Sizer
Soft silicone masks contour gently to the face providing a secure and comfortable fit. Available in small, medium and large sizes.
FAQs
The small size mask is recommended for up to 18 months of age. The medium size mask is recommended for 1 to 5 years of age. The large size mask is recommended for over 5 years of age.
Masks are essential for infants and younger children. Masks are also ideal for increased ease of use.
The mask is silicone. It’s not made or manufactured with bisphenol A (BPA), phthalates, latex or lead.
The COMFORTSEAL* Mask should be replaced after 6 months of use.
The mask can be cleaned after each use.
- Remove the Elbow Adapter from the mask. Soak both parts for 15 minutes in a mild solution of liquid dish detergent and lukewarm clean water. Agitate gently.
- Rinse parts in clean water.
- Shake out excess water and allow to air dry. Ensure parts are dry before reassembly.
- To reassemble, insert the Elbow Adapter into the opening on the mask. Hold the mask in an upright position. Rotate the Elbow Connector so it is horizontal.
The mask can be disinfected each day.
- First, clean the mask. Do not dry or reassemble the device.
-
- 2A - Bleach: Soak the parts in a 1:50 bleach to water solution (1 tablespoon (15 mL) bleach in 3¼ cups (800 mL) water) for 3 minutes. You may substitute a respiratory equipment disinfectant (such as Milton†, Dodie†, Control III† or Cidex†) for the bleach solution. Follow the disinfectant instructions for use.
- 2B - Isopropyl Alcohol: Soak the parts in 70% isopropyl alcohol for 1 minute.
- 2A - Bleach: Soak the parts in a 1:50 bleach to water solution (1 tablespoon (15 mL) bleach in 3¼ cups (800 mL) water) for 3 minutes. You may substitute a respiratory equipment disinfectant (such as Milton†, Dodie†, Control III† or Cidex†) for the bleach solution. Follow the disinfectant instructions for use.
- Rinse parts thoroughly in clean water.
- Shake out excess water and allow to air dry. Ensure parts are dry before reassembly.
- To reassemble, insert the Elbow Adapter into the opening on the mask. Hold the mask in an upright position. Rotate the elbow connector so it is horizontal.
† trade-marks of the respective companies
Recommended Solutions
