Filters aerosolized medication, viruses and bacteria
Nebulized Medication
The filter kit filters fugitive emissions (aerosolized medication)1, viruses2 and bacteria2 from the patient's exhaled breath. It reduces exposure of healthcare providers to potentially harmful emissions.
The filter kit consists of a tee-connector with mouthpiece and the filter. It comes fully assembled with instructions for use. AEROECLIPSE* BAN* Nebulizers are sold separately.
Single use only. Replace the filter kit after each use. Do not clean or disinfect.
Currently this is not available for purchase through this website.
Where to buy
Where To Buy Filter Kit
Contact a Sales Representative in Your Area
Share
For use with AEROECLIPSE* BAN* Nebulizers
The filter kit is a single patient, single use accessory (use only once and replace kit after each use).
Aerosol Performance:
Aerosol Output1 of AEROECLIPSE* BAN* Nebulizer with Filter Kit compared to the BAN* Nebulizer alone
≥ 90 %
Aerosolized Medication Emissions1 when assembled with AEROECLIPSE* BAN* Nebulizer
≤ 1 %
Filtration Performance:
Viral Filtration Efficiency2
≥ 99.99 %
Bacterial Filtration Efficiency2
≥ 99.999 %
TMI, Data on file 30 August 2020.
Breathing Filter Product Report, 24 October 2020, on file TMI.
Efficiency of a Nebulizer Filter Kit to Prevent Environmental Contamination During Nebulizer Therapy
Use the AEROECLIPSE* II BAN* Nebulizer with filter kit to eliminate environment loss of exhaled aerosol.
Replace the mouthpiece of the AEROECLIPSE* BAN* Nebulizer with the assembled filter kit. Note: Set aside the nebulizer mouthpiece. It can be reinstalled after the filter kit has been removed.
Instruct the patient to tightly seal their lips around the mouthpiece, and inhale and exhale normally through the nebulizer. Verify movement of the green feedback button on the nebulizer.
Ensure the filter kit’s exhalation flow path is not blocked.
Continue treatment using the instructions supplied with the nebulizer.
Warning: Single use only. Replace kit after each use. Risk of infection due to multi-patient use.
Replace the mouthpiece of the AEROECLIPSE* BAN* Nebulizer with the assembled filter kit. Note: Set aside the nebulizer mouthpiece. It can be reinstalled after the filter kit has been removed.
Instruct the patient to tightly seal their lips around the mouthpiece, and inhale and exhale normally through the nebulizer. Verify movement of the green feedback button on the nebulizer.
Ensure the filter kit’s exhalation flow path is not blocked.
Continue treatment using the instructions supplied with the nebulizer.
Warning: Single use only. Replace kit after each use. Risk of infection due to multi-patient use.
